Differences

This shows you the differences between two versions of the page.

--- virtualizor:install-kvm [2018/02/25 02:36] – [Partisi] kbadmin
+++ virtualizor:install-kvm [2018/03/27 09:41] (current) – [Login] kbadmin
@@ Line 5: / Line 5: @@
   * KVM tidak mendukung sistem operasi 32 bit
-===== Centos 6.x 64 bit =====
-Sebelum anda melakukan installasi kvm pastikan anda menginstall beberapa paket pendukung.
 ==== Partisi ====
@@ Line 14: / Line 12: @@
 | Storage         | Disk space yang akan digunakan untuk pembuatan VPS | Anda bisa menggunakan sebagai **Logical Volume** untuk KVM atau **File Based Storage** untuk jenis qcow2 |
+===== Centos 6.x 64 bit =====
+Sebelum anda melakukan installasi kvm pastikan anda menginstall beberapa paket pendukung.
 ==== Persiapan ====
@@ Line 22: / Line 23: @@
 ==== Setting Bridge ====
+Anda menggunakan eth0 atau eth1 jika eth0 cek dengan cara seperti ini
+<code>
+root# cat /etc/sysconfig/network-scripts/ifcfg-eth0
+DEVICE=eth0
+BOOTPROTO=static
+TYPE=Ethernet
+HWADDR=00:25:90:98:35:90
+IPADDR=105.94.182.93
+NETMASK=255.255.255.248
+GATEWAY=105.94.182.89
+IPV6INIT=yes
+IPV6_AUTOCONF=yes
+ONBOOT=yes
+</code>
+=== Backup setting eth0/1 ===
+<code>
+root# cp /etc/sysconfig/network-scripts/ifcfg-eth0 /etc/sysconfig/network-scripts/ifcfg-eth0.bak
+</code>
+=== Buat File Bridge ===
+<code>
+root# nano /etc/sysconfig/network-scripts/ifcfg-viifbr0
+</code>
+isi seperti ilustrasi ini
+<code>
+DEVICE=viifbr0
+TYPE=Bridge
+BOOTPROTO=static
+IPADDR=105.94.182.93
+NETMASK=255.255.255.248
+GATEWAY=105.94.182.89
+ONBOOT=yes
+</code>
+IP Address dan gateway diatas ganti sesuai dengan ip dan gateway anda.
+=== Edit eth0/1 ===
+<code>
+root# nano /etc/sysconfig/network-scripts/ifcfg-eth0
+</code>
+kira-kira seperti ini
+<code>
+DEVICE=eth0
+HWADDR=00:25:90:98:35:90
+IPV6INIT=yes
+IPV6_AUTOCONF=yes
+ONBOOT=yes
+BRIDGE=viifbr0
+</code>
+=== Restart Network ===
+<code>
+root# service network restart
+</code>
+dan anda akan menghasilkan setting seperti ini
+<code>
+root# ifconfig
+eth0      Link encap:Ethernet  HWaddr F4:CE:46:B2:8A:58
+          inet6 addr: fe80::f6ce:46ff:feb2:8a58/64 Scope:Link
+          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
+          RX packets:194228 errors:0 dropped:0 overruns:0 frame:0
+          TX packets:54875 errors:0 dropped:0 overruns:0 carrier:0
+          collisions:0 txqueuelen:1000
+          RX bytes:230348239 (219.6 MiB)  TX bytes:7035156 (6.7 MiB)
+          Memory:fbe60000-fbe80000
+lo        Link encap:Local Loopback
+          inet addr:127.0.0.1  Mask:255.0.0.0
+          inet6 addr: ::1/128 Scope:Host
+          UP LOOPBACK RUNNING  MTU:16436  Metric:1
+          RX packets:1776 errors:0 dropped:0 overruns:0 frame:0
+          TX packets:1776 errors:0 dropped:0 overruns:0 carrier:0
+          collisions:0 txqueuelen:0
+          RX bytes:197690 (193.0 KiB)  TX bytes:197690 (193.0 KiB)
+viifbr0   Link encap:Ethernet  HWaddr F4:CE:46:B2:8A:58
+          inet addr:192.111.153.250  Bcast:192.111.153.251  Mask:255.255.255.252
+          inet6 addr: fe80::f6ce:46ff:feb2:8a58/64 Scope:Link
+          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
+          RX packets:65 errors:0 dropped:0 overruns:0 frame:0
+          TX packets:41 errors:0 dropped:0 overruns:0 carrier:0
+          collisions:0 txqueuelen:0
+          RX bytes:4252 (4.1 KiB)  TX bytes:5626 (5.4 KiB)
+</code>
+==== Install KVM ====
+<code>
+wget -N http://files.virtualizor.com/install.sh
+chmod 0755 install.sh
+./install.sh email=your@email.com kernel=kvm
+</code>
+kemudian **restart server**
+==== Login ====
+Selanjutnya untuk login ke port ini
+  * https://Your-IP:4085/
+  * http://Your-IP:4084/
+~~DISCUSSION~~

Layanan